Stainless Steel Backsplash
Set a sheet of plywood on two sawhorses to create a stable work bench.Place the back wall down to the marked guideline is half an inch beyond the edge of the plywood. Secure in place with clamps in- Stainless Steel Backsplash.
12 Photos Gallery of: Stainless Steel Backsplash
Equip stainless steel backsplash with a round blade to cut metal with tungsten carbide tipped saw. The package will Indicate That the blade is suitable for cutting ferrous and non-ferrous metals. Apply gear oil or machine oil to the teeth of the tungsten carbide cutting sheet metal and a half inch above the teeth with a cloth on Both Sides of the sheet. Be Careful When Applying the oil in order not to cut.
September 6 the blade depth from 1/8 to 1/4 inch deeper than thick stainless steel. Use full face shield and leather gloves designed to work on metal. Turn the circular saw and follow the guide to cut the rear wall.Practice cutting stainless steel scrap Until They are competent.Reapplying oil to the blade When Necessary to cut stainless steel.Be careful When handling the cutting stainless steel; edges are very sharp.Do not cut near flammable liquids and materials; metal cutting results in many sparks. the saw before returning to lubricate the blade stainless steel backsplash