Rolling Office Chairs Covers

Rolling Office Chairs Covers – If you want to work at home or have a sewing or craft room, most likely have an office chair that, while comfortable, do not really reflect their style or enhance their decoration because the structure of office chairs vary widely, covers a often they have to be custom made which can be expensive. You can make your own slipcover office chair fabric you choose, it is easy to complement your décor and express your style.

Place a piece of tissue paper on a hard floor and place the rolling office chairs on top of her with his back lying on paper or large flat surface. Use the pencil to draw an inch away from the whole outer edge of the top piece back of the chair all the way. Place the chair upright. Place a piece of tissue paper on the seat. Draw the outline of the top of the seat cover. Add two inches to this number and cut a piece of tissue paper that is this long measured by 5 inches wide.

Cut the pattern pieces and cut the sections where the pieces overlap the rolling office chairs arm. Pre Wash and dry the fabric and iron the fabric to remove wrinkles. Place back pieces right sides together and pin. Sew the upper sections with a seam allowance 1/2 inch around the curved side. Bend your arm sections cutting sleeve seat part, if any. Sew bottom hem long raw edge of the hive as turning 1/2 an inch to the wrong side of the fabric. Pin in place and sew a seam allowance of 1/4 inch.