Wall Mounted Magazine Rack

Measure the wall space where you want the rack wall hanging plasma wall mounted magazine rack. Sit in the place where it normally sits down to watch the plasma magazine to determine a comfortable height where you can watch magazine and the magazine rack in the room seems appropriate. Mark the approximate location with a pencil.

Slides a stud finder horizontally through the wall to mark the location of the posts. Because wall mounted magazine rack are so heavy, you should only hang plasma racks in areas where you have access to the posts. If the housing of the plasma television in at least two studs could mean not installed television rack and the wall fall unexpectedly. Mark the location of each stud with a pencil.

Ask two assistants to hold the wall mounted magazine rack against the wall where you want to install, noting the positions of the uprights so that it can drill into as many blocks as possible. Set a level on top of the rack to make the necessary adjustments so that the rack is level. Large caliber drilling screws through the television rack and into the studs. The number of screws you drill depends on the size of his rack, but plans to drill at least one column of four screws in each post.