Building L Shaped Standing Desk

L shaped standing desk are a new trend that has been created and is accented by conservative health workers. Standing up while working, you can pay more attention to what you do, work harder and burn more calories in the process. As the idea of ​​standing desk is such a new concept, the desks are quite expensive and have limited access. To save some money, create your own L shaped standing desk for use at home or at work.

Instructions

Select section plywood that measures 1/2-inch by 39-inches tall and 25 inches wide. Measure every 10-inches along the 39-inch to the left side. Measure every 10-inches along the 39-inch to the right side. Attach one L bracket at each 10-inch total of four L brackets along the edge.

Place 39-inch long by 30 inch wide sheet of plywood on a flat surface. Drive a screw through each L bracket to create an L shaped standing desk structure. Place 39-inch long by 30 inch wide sheet of plywood on a flat surface. Line 39-inch side of 39 inch long by 29-inch wide with the right edge of the section 39-by-25-inch having the L brackets to the right. Drive a screw through each L bracket to create a U-shaped structure.

Attach two L-shaped bracket along the end edges on each side of the U-shaped structure. Place each L-shaped bracket 6-inches from each corner. The upper end of the bracket should be flush with the top edge. Stand the U-shaped structure upward to the L-shaped brackets is at the top. Place section 25-inch by 30-inch plywood that is 1 inch thick over the upper edge. Drive a screw through each bracket to secure top place.